High End Systems MMS100 - Global Control All in One

Global Control All in One
All-in-One Control Option
When the Global Control parameter is set to a DMX value = 253, you can use the Global Control Modifier parameter to
control the All-in-One control option. This option helps you visualize what the graphics engine is doing. The All-in-One
option maps the media file content of Collage and Curved Surface support effects as well as up to three effects applied to
graphics objects and displays it in a multi-quadrant grid.
These effects are accessed according to rendering hierarchy used by the graphics engine.
When the Global Control parameter is set to the All-In-One option, you can view the individual effects applied to each
Graphic object in the Global Control Modifier parameter.
Note:
As the next effect level is displayed, each object displays the highest level of effect applied to that point.
0
Displays each defined Graphic Object with no effects applied
1
Displays the first effect (if any) applied to any defined Graphic Object
2
Displays the second effect (if any) applied to any defined Graphic Object
3
Displays the third effect (if any) applied to any defined Graphic Object
4
Displays the fourth effect (if any) applied to any defined Graphic Object
5
Displays the fifth effect (if any) applied to any defined Graphic Object
6
Displays the sixth effect (if any) applied to any defined Graphic Object
7
Displays the seventh effect (if any) applied to any defined Graphic Object
8
Displays the eighth effect (if any) applied to any defined Graphic Object
9
Displays the ninth effect (if any) applied to any defined Graphic Object