Global Masking Framing
Eight Framing parameters allow you to clip an image from each corner in horizontal and vertical directions.
Default DMX Value:
0 = no effect applied.
Each corner has an x and a y value that adjust and correct scale of the projection from any corner toward the image
center on that axis.
Setting all Framing X and Y parameters DMX values to zero will place the four corners of the image at the four corners of
the projector output. Adjusting framing x values across 255 (100%) clips the image from the selected x corner position
horizontally toward the image. Adjusting keystone y values toward 255 (100%) clips the image from the selected y corner
position vertically across the image.
To Next Page
Loading...
