Effect Faux Tile
Faux Tile
Effect Mode parameter DMX value = 56
This effect divides the image into a grid of tiles with simulated lighting at the edges. The color of the center pixel in each
cell defines the solid color for that tile. You can control the number and spacing of tile, choose between a black and white
grid and adjust color peaking.
• Modifier 1: Controls the tile size. The default DMX value of 0 displays a 100 x 100 grid of tiles. Increasing the
DMX value decreases the grid divisions to a minimum of 10 x 10 at a value of 255 (100%).
• Modifier 2: Adjusts the grid spacing and color around each tile. A DMX value of 0 = the minimum black line
between tiles. The spacing increases to a maximum at a DMX value of 127 (49%). At a value of 128 (50%), the
space between tiles reverts to the minimum spacing and turns white. Increasing the value further increases the
white spacing to a maximum at a DMX value of 255 (100%).
• Modifier 3: Adjusts the color peaking to simulate lighting at the tile edges. A DMX value of 0 = no adjustment and
flat color across the tile. As you increase the DMX value, the peaking increases to a maximum at 255 (100%).
NOTE: A small number of larger “tiles” will also result in reduced color variation.
To Next Page
Loading...
