EasyManua.ls Logo

High End Systems MMS100 - Effect Zoom Blur

High End Systems MMS100
280 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Effect Zoom Blur
Zoom Blur
Effect Mode parameter DMX value = 59
Zooms into a position on the image with a mult-image blurring effect. You can control the position of the zoom center on
the image.
Modifier 1:The default DMX value of 128 (50%) = no adjustment. Values below the midpoint move the horizontal
center of the zoom right to 0 = maximum. Values above the midpoint move the horizontal center of the zoom left
to 255 = maximum.
Modifier 2:The default DMX value of 128 (50%) = no adjustment. Values below the midpoint move the vertical
center of the zoom down as you approach 0 = maximum. Values above the midpoint move the vertical center of
the zoom up to 255 (100%) = maximum.
Modifier 3:The default DMX value of 128 (50%) = no adjustment. Values below the midpoint zoom in to the image
centerpoint to 0 = maximum image size. Values above the midpoint zoom away from the image centerpoint to
255 = a minimum image size.

Table of Contents

Related product manuals