Colorize - Gray Scale
Colorize Gray Scale
Effect Mode parameter DMX value = 44
This effect maps a selected pixel intensity to a selected color scheme. A variety of color schemes simulate effects like
thermography. This is especially effective effect when applied to input from the internal camera.
• Modifier 1:Selects from color schemes along a range of values from 0 – 255.
• Modifier 2:Sets the zero point of the color intensity level from 0 = no intensity to 255 (100%) = maximum intensity.
• Modifier 3:Fades from original color scheme to new color scheme using selected intensity.
To Next Page
Loading...
