High End Systems MMS100 - Color to Alpha Channel Inverted

Color to Alpha Channel Inverted
Color to Alpha, Inverted
Effect Mode parameter DMX value = 50
This parameter varies the transparency level of the inverse of an image’s component color values.
• Modifier 1: Increases the inverse red component opacity or intensity from 0 = no adjustment to 255 (100%) = full
green and blue opacity (intensity).
• Modifier 2: Increases the green component opacity or intensity from 0 = no adjustment to 255 (100%) = full red
and blue opacity (intensity).
• Modifier 3: Increases the blue component opacity or intensity from 0 = no adjustment to 255 (100%) = full red and
green opacity (intensity).