High End Systems MMS100 - 3 D Object - Edge Glow

3D Object - Edge Glow
Glow
Effect Mode parameter DMX value = 73
Glow colorizes and creates a glow on the 3-D object separate from the media texture on it. You can apply this effect to
any 3-D object no matter which media file texture is applied to it. This parameter provides an option to view a 3-D object
without displaying the associated texture.
• Modifier 1: Increases red color component from a DMX value of 0 = no adjustment to 255 (100%) = maximum red
saturation.
• Modifier 2: Increases blue color component from a DMX value of 0 = no adjustment to 255 (100%) = maximum
blue saturation.
• Modifier 3: Increases green color component from a DMX value of 0 = no adjustment to 255 (100%) = maximum
green saturation.