Graphics Engine Opacity and Intensity
Adjusting an object’s opacity allows one object to “show through” another. You can adjust the opacity of an individual 3-D
object from completely transparent to full opacity using this parameter. Increase opacity from not visible at a value of zero
to full opacity at a value of 255.
Default DMX Value: 0 = Completely Transparent
The Global Intensity parameter provides a similar adjustment to the combined image. This global control parameter
controls intensity levels on the overall image. When you have multiple objects in relation to each other, the Global
Intensity parameter is the best way to apply a fade to the composite image.
Default DMX Value: 0 = Completely Dark
To Next Page
Loading...
