Set - Fixture Screen
This screen shows all configuration settings for the motions system as well as the embedded LCD screen.
Pan Invert
• Off
• On (pan will reverse direction as compared to incoming DMX)
Tilt Invert
• Off
• On (tilt will reverse direction as compared to incoming DMX)
Pan / Tilt Swap
• Off
• On (pan / tilt will reverse operation as compared to incoming DMX)
Data Loss Timeout
• Long
• Short
Display Invert
• Auto - (Internal tilt sensor is used to determine screen direction. )
• On
• Off
Factory Defaults
• Off
• On (Factory defaults reset all settings to initial values)
Pan Rotation Correction
• CW (Clockwise)
• CCW (Counter Clockwise)
To Next Page
