EasyManua.ls Logo

High End Systems MMS100 - Effect Edge Frame Profile

High End Systems MMS100
280 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Effect Edge Frame Profile
Edge Frame Profiles
Effect Mode parameter DMX value = 133
This effect contains three modes that modify the Global Image Edge Fade parameters to frame the global composite
image. Modifier 2 and Modifier 3 adjustments vary depending which of the framing modes is selected with Modifier 1.
NOTE:If the Global Image Edge Fade DMX values are set to Zero, the Framing output will be unseen in modes 0
and 1.
Modifier 1 Values
This parameter allows you to select from three framing modes.
DMX Value
= 0
Frames the image using an Internal Frame profile to control the Global Fade Edge parameter
appearance.
DMX Value =
1
Frames the image using an Internal Frame profile to control the Global Fade Edge parameter
appearance. Rendered Graphic Object content is selected at Frame texture using Modifier 3
parameter
DMX Value =
2
Image clipping changing operation of the Global Image Edge Fade parameters to Emulate Framing
Shutters
Modifier 2 Values
When the Modifier 1 DMX value is 0 or 1, this channel selects from profiles that vary in gradient density or pattern.
When Modifier 1 DMX value is 2 or above, this Modifier is not used.
Modifier 3 Values
When Modifier 1 DMX Value is 1, this parameter determines how to use the rendered Graphic Object content as a texture
for the frame.
When Modifier 1 DMX Value is 2 or above, this Modifier is not used.
Modifier 3 Values
Applies when Modifier 1 has a value of 1
DMX Value = 0
Graphic Object 1 texture without applied Effects
DMX Value = 1
Graphic Object 1 texture including its first applied Effect
DMX Value = 2
Graphic Object 1 texture including its first two applied Effects
DMX Value = 3
Graphic Object 1 texture including its first three applied Effects
DMX Value = 10
Graphic Object 2 texture without applied Effects
DMX Value = 11
Graphic Object 2 texture including its first applied Effect
DMX Value = 12
Graphic Object 2 texture including its first two applied Effects
DMX Value = 13
Graphic Object 2 texture including its first three applied Effects
DMX Value = 20
Graphic Object 3 texture without applied Effects
DMX Value = 21
Graphic Object 3 texture including its first applied Effect
DMX Value = 22
Graphic Object 3 texture including its first two applied Effects
DMX Value = 23
Graphic Object 3 texture including its first three applied Effects

Table of Contents

Related product manuals