Effect TilingOn
Tiling On
Effect Mode parameter DMX value = 48
Tiling varies the number of times a media file is applied as a texture to an object. This effect works best on objects that
have an undistributed surface area.
• Modifier 1:Adjusts the size and number of tiles along the x axis. A value of 128 (50%) =no adjustment. Values
below the midpoint size a single image to 0 = maximum image magnification. Values above the midpoint increase
number of images displayed to 255 (100%) = maximum.
• Modifier 2: Adjusts the size and number of tiles along the y axis. A value of 128 (50%) = no adjustment. Values
below the midpoint size a single image to 0 = maximum image magnification.Values above the midpoint increase
number of images displayed to 255 (100%) = maximum.
• Modifier 3:Adjusts the spacing between tiles. Black spacing between tiles increases from a 0 = a minimum width
to 127 = a maximum width. Transparent spacing between tiles increases from 128 = a minimum width to 255 = a
maximum width.
To Next Page
Loading...
