All or Nothing
All or Nothing
Effect Mode parameter DMX value = 15
This effect reduces all color values to full saturation or no color based on comparison to a set threshold. This effect
creates an image with fully saturated color.
• Modifier 1: Compares the red component of a pixel to the threshold value and converts it to full color if it is greater
than the threshold and to black if it is below the threshold.
• Modifier 2: Compares the green component of a pixel to the threshold value and converts it to full color if it is
greater than the threshold and to black if it is below the threshold.
• Modifier 3: Compares the blue component of a pixel to the threshold value and converts it to full color if it is
greater than the threshold and to black if it is below the threshold.
To Next Page
Loading...
