High End Systems MMS100 - Fade Edge and Mask - Color Change

Fade Edge and Mask - Color Change
Fade Edge Color
Effect Mode parameter DMX value = 129
This effect applies color to a selected Fade Edge parameter, (see Image Edge Fade).
• Modifier 1: Increases red color component from 0 = no adjustment to 255 (100%) = maximum red saturation.
• Modifier 2: Increases blue color component from 0 = no adjustment to 255 (100%) = maximum blue saturation.
• Modifier 3: Increases green color component from 0 = no adjustment to 255 (100%) = maximum green saturation.
Mask Color
Effect Mode parameter DMX value = 130
This effect applies a color to both the selected Mask shape and any selected Edge parameter. Color can also be applied
to Mask shape and Edge parameters separately.
• Modifier 1: Increases red color component from a DMX value of 0 = no adjustment to 255 (100%) = maximum red
saturation.
• Modifier 2: Increases blue color component from a DMX value of 0 = no adjustment to 255 (100%) = maximum
blue saturation.
• Modifier 3: Increases green color component from a DMX value of 0 = no adjustment to 255 (100%) = maximum
green saturation.