Key on Intensity
Intensity Key
Effect Mode parameter DMX value = 45
This effect turns pixels of a selected intensity transparent or applies the reverse effect.
• Modifier 1: Selects intensity from a DMX value of 0 = no intensity to 255 (100%) = full intensity.
• Modifier 2: Selects intensity bandwidth from a DMX value of 0 = narrowest bandwidth to 255 = widest bandwidth.
• Modifier 3: Turns selected intensity range transparent from 0 = no change to 128 = fully transparent. DMX values
above the midpoint of the range change all intensities outside of the selected range transparent from 129 = no
transparency to 255 = full reverse transparency.
To Next Page
Loading...
