High End Systems MMS100 - CMY Color Modification

CMY Color Modification
CMY
Effect Mode parameter DMX value = 1
This parameter simulates CMY color by inverting RGB color components. Use this parameter when you want to color mix
with a CMY color model instead of RGB color model.
• Modifier 1: Increases cyan color component from 0 = no adjustment to 255 (100%) = maximum cyan saturation.
• Modifier 2: Increases magenta color component from 0 = no adjustment to 255 (100%) = maximum magenta
saturation.
• Modifier 3: Increases yellow color component from 0 = no adjustment to 255 (100%) = maximum yellow
saturation.