High End Systems MMS100 - Effect Mode Parameters

Effect Mode Parameters
Three Effect Mode parameters are available for each individual 3-D object, each with three Modifier parameters. Both
Effect parameters have an identical list of color and visual effect options. This lets you apply a dual-effect combination to
the selected 3-D object.
NOTE: Not all modes combine effectively. For example, you cannot glow a wobbulating object very well.
The table below describes the interaction between an Effect Mode parameter and its three associated Modifier
parameters. You can find a detailed description and example of each option in the various Graphics Engine - Effect Mode
sections.
NOTE: Modifier channels for Effect Mode 1 are labeled as CMY in the Hog system so you can also make use of
the color picker, HSI, and other Hog functions. Use the CMY parameter controls to adjust the three Effect Mode 1
Modifier parameters for both the Global and Graphic fixture types. The default for Effect Mode 1 is set to CMY1 as
well. Effect Mode 2 and 3 Modifier channels are labeled Mod 1, Mod 2, and Mod 3.
DMX
Value
Effect Name
Modifer 1
Modifer 2
Modifer 3
0
Safe (no effects selection)
NA
NA
NA
1
CMY (RGB invert)
Cyan
Magenta
Yellow
2
CMY Add
Cyan
Magenta
Yellow
3
"CMY Add, All Non-black Pixels"
Cyan
Magenta
Yellow
4
"RGB Add, All Pixels"
Red
Green
Blue
5
"RGB Add 2, All Pixels"
Red
Green
Blue
6
"RGB Add, All Non-black Pixels"
Red
Green
Blue
7
RGB Swap to GBR
Red to Green
Green to Blue
Blue to Red
8
RGB Swap to BRG
Red to Blue
Green to Red
Blue to Green
9
Solarize 1 inverts a color value < DMX value
Red
Green
Blue
10
Solarize 2 inverts a color if value > DMX value
Red
Green
Blue
11
Solarize 3 sets color to 0 if value < DMX value
Red
Green
Blue
12
Solarize 4 sets color to 0 if value > DMX value
Red
Green
Blue
13
DotP and Resample
Red
Green
Blue
14
Color Cycle cycles colors with DMX value
controlling cycle speed
Red
Green
Blue
15
All or Nothing sets color values > mod value =
255 and all other color values = 0
Red
Green
Blue
16
Solid color RGB Red Green Blue
Red
Green
Blue
17
RGB Invert
From Red to Cyan
From Green to
Magenta
From Blue to
Yellow
18
"RGB, Invert and Swap to GBR"
Red to Green
Green to Blue
Blue to Red
19
"RGB, Invert and Swap to BRG"
Red to Blue
Green to Red
Blue to Green
20
Edge Detect Color
Horizontal Search
Size
Vertical Search
Size
Comparison
Threshold
21
Edge Detect B/W
Horizontal Search
Size
Vertical Search
Size
Comparison
Threshold
22
"Texture Ripple, Horizontal"
Amplitude
Frequency
Phase
23
"Texture Ripple, Vertical"
Amplitude
Frequency
Phase
24
"Texture Ripple, Circular"
Amplitude
Frequency
Phase + Direction
25
"Texture Ripple, Circular Asymmetrical"
Amplitude
Frequency
Phase
26
Transparent Color Fine selects key color using
Modifier channels
Red
Green
Blue
27
Transparent Color Medium selects key color
using Modifier channels
Red
Green
Blue
28
Transparent Color Coarse selects key color
using Modifier channels
Red
Green
Blue
29
"Transparent Color Invert, Fine selects key color
using Modifier channels"
Red
Green
Blue
30
"Transparent Color Invert, Medium selects key
using Modifier channels"
Red
Green
Blue
31
"Transparent Color Invert, Coarse selects key
using Modifier channels"
Red
Green
Blue
32
Scan Line converts image colors to colors in a
single line of the image
Selects Scan Line
Fades to
converted Image
NA
33
Transparent Wipes “opens” the selected
graphic to reveal another graphic behind
Area of wipe
Selects center of
wipe
Selects from 6
wipe options