CMA - Install and Launch
The latest version of Content Management Application software that is available on the High End Systems website that
communicates remotely with all MMS100, Axon HD, Axon HD Pro and DLHD's over an Ethernet network to:
• Upload and download custom digital content to fixtures
• Remotely access menu commands
• Update software
The MMS100 requires a connected computer on the same network for use and communication.
The following are the minimum hardware requirements for a remote computer running the CMA:
• Windows XP, Vista, Windows 7 (32 and 64 bit)
• Microsoft .Net Framework 2.0 or later
• 100/1000 base Ethernet card (Gigabit Ethernet is recommended for fast content uploading)
• Using a wireless connection for communication is not recommended.
For more information on CMA operation, see the detailed CMA section.
After downloading, navigate and launch CMA.msi installer file
When running the CMA, it will automatically find and identify all connected fixtures.
Be sure firewall settings allow network communication properly.
To Next Page
Loading...