High End Systems MMS100 - 3 D Object - Edge Glow Color Cycle

3D Object - Edge Glow Color Cycle
Glow Color Cycle
Effect Mode parameter DMX value = 74
Glow colorizes and creates a glow on the 3-D object separate from the media texture on it. You can apply this effect to
any 3-D object no matter which media file texture is applied to it. This parameter provides an option to view a 3-D object
without an associated texture.
• Modifier 1: Defines the red color component speed. A DMX value of 128 (50%) = default cycle speed. DMX
Values above the midpoint increase cycle speed in a forward direction to 255 (100%) = fastest change speed.
DMX values below the midpoint increase cycle speed in a backward direction to 0 = fastest change speed.
• Modifier 2: Defines the green color component speed in the same way as Modifier 1.
• Modifier 3: Defines the blue color component speed in the same way as Modifier 1.