High End Systems MMS100 - Color Cycle

Color Cycle
Color Cycle
Effect Mode parameter DMX value = 14
The image’s color components cycle through RGB, black, and white. When no Red Green or Blue is added, image fades
from full white, to normal image, to black. When RGB/CMY is added the image fades from the RGB value, to the image
with color added.
• Modifier 1:Increases red color component from 0 = no adjustment to 255 (100%) = maximum red saturation.
• Modifier 2:Increases green color component from 0 = no adjustment to 255 (100%) = maximum green saturation.
• Modifier 3:Increases blue color component from 0 = no adjustment to 255 (100%) = maximum blue saturation.