Effect Faux LED
Faux LED
Effect Mode parameter DMX value = 55
This effect divides the image into a grid of circles that mimic an LED wall. The color of the center pixel in each cell defines
the solid color for that circle. You can control “LED” size, background and color peaking.
• Modifier 1:Controls the “LED” size. The default DMX value of 0 displays a 100 x 100 grid of “LEDs”. Increasing
the DMX value decreases the grid divisions to a minimum of 10 x 10 at a value of 255 (100%).
• Modifier 2: Adjusts the grid spacing and color around each “LED”. A DMX value of 0 = the minimum black line
between cells. The spacing increases to a maximum at a DMX value of 127 (49%). At a value of 128 (50%), the
space between cells reverts to the minimum spacing and turns white. Increasing the value further increases the
white spacing to a maximum at a DMX value of 255 (100%).
• Modifier 3:Adjusts the color peaking to simulate lighting at the “LED” center. A DMX value of 0 = no adjustment
and flat color across the cell. As you increase the DMX value, the peaking increases to a maximum at 255
(100%).
NOTE: A small number of larger “LEDs” will also result in reduced color variation.
To Next Page
Loading...
