High End Systems MMS100 - Color to Alpha Channel

Color to Alpha Channel
Color to Alpha
Effect Mode parameter DMX value = 49
This parameter varies the transparency level of an image’s component color values.
• Modifier 1: Increases the red component opacity or intensity from 0 = no adjustment to 255 (100%) = full red
opacity (intensity).
• Modifier 2: Increases the green component opacity or intensity from 0 = no adjustment to 255 (100%) = full green
opacity (intensity).
• Modifier 3: Increases the blue component opacity or intensity from 0 = no adjustment to 255 (100%) = full blue
opacity (intensity).