HIKVISION DS-K1T605 Series - Page 100

5.
Oponal: Click Get from Device to get the aendance data
from the device.
6.
Oponal: Click Reset to reset all search condions and edit the
search condions again.
7.
Click Search.
The result displays on the page. You can view the employee's
required
aendance status and check point.
8.
Oponal: Aer searching the result, perform one of the
following
operaons.
Generate
Report
Click Report to generate the aendance
report.
Export Report Click Export to export the results to the
local PC.
Generate Instant Report
It supports to generate the a series of aendance reports
manually to view the employees' aendance results.
Before You Start
Calculate the
aendance data.
Note
You can calculate the aendance data manually, or set the
schedule so that the client can calculate the data automacally
every day. For details, refer to Calculate Aendance Data.
Steps
1.
Enter the Time & Aendance module.
2.
Click Aendance Stascs Report .
3.
Select a report type.
4.
Select the department or person to view the
aendance
report.
5.
Set the start
me and end me during which the aendance
data will be displayed in the report.
6.
Click Report to generate the
stascs report and open it.
Custom Aendance Report
The client supports mulple report types and you can pre-dene
the report content and it can send the report automacally to the
email address you
congured.
Steps
Note
Set the email parameters before you want to enable auto-sending
email funcons. For details, refer to .
1.
Enter the Time &
Aendance module.
2.
Click Aendance Stascs Custom Report .
3.
Click Add to
pre-dene a report.
4.
Set the report content.
Report Name
Enter a name for the report.
Report Type
91