EasyManuals Logo

HIKVISION DS-K1T605 Series User Manual

HIKVISION DS-K1T605 Series
107 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
The default IP address: 192.0.0.64
The default port No.: 8000
The default user name: admin
7.1 Acvate via Device
If the device is not acvated, you can acvate the device aer it is
powered on.
On the Acvate Device page, create a password and conrm the
password. Tap Nextand the device will acvated.
Cauon
The password strength of the device can be automacally
checked. We highly recommend you change the password of your
own choosing (using a minimum of 8 characters, including at least
three kinds of following categories: upper case leers, lower case
leers, numbers, and special characters) in order to increase the
security of your product. And we recommend you reset your
password regularly, especially in the high security system,
reseng the password monthly or weekly can beer protect your
product.
Proper conguraon of all passwords and other security sengs
is the responsibility of the installer and/or end-user.
7.2 Acvate via SADP
SADP is a tool to detect, acvate and modify the IP address of the
device over the LAN.
Before You Start
Get the SADP
soware from the supplied disk or the ocial
website hp://www.hikvision.com/en/ , and install the SADP
according to the prompts.
The device and the PC that runs the SADP tool should be within
the same subnet.
The following steps show how to
acvate a device and modify its
IP address. For batch acvaon and IP addresses modicaon,
refer to User Manual of SADP for details.
Steps
1.
Run the SADP
soware and search the online devices.
2.
Find and select your device in online device list.
3.
Input new password (admin password) and
conrm the
password.
Cauon
STRONG PASSWORD RECOMMENDED-We highly recommend
you create a strong password of your own choosing (using a
minimum of 8 characters, including upper case leers, lower
case leers, numbers, and special characters) in order to
increase the security of your product. And we recommend you
reset your password regularly, especially in the high security
system,
reseng the password monthly or weekly can beer
protect your product.
4.
Click
Acvate to start acvaon.
12

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-K1T605 Series and is the answer not in the manual?

HIKVISION DS-K1T605 Series Specifications

General IconGeneral
BrandHIKVISION
ModelDS-K1T605 Series
CategoryIP Access Controllers
LanguageEnglish

Related product manuals