HIKVISION DS-K1T605 Series User Manual

You can enter the informaon of mulple persons in a predened
template (a CSV le) to import the informaon to the client in a
batch.
Steps
1.
Enter the Person module.
2.
Select an added
organizaon in the list, or click Add in the
upper-le corner to add an organizaon and then select it.
3.
Click Import to open the Import panel.
4.
Select Person
Informaon as the imporng mode.
5.
Click Download Template for Imporng Person to download
the template.
6.
Enter the person informaon in the downloaded template.
Note
•
If the person has mulple cards, separate the card No. with
semicolon.
•
Items with asterisk are required.
•
By default, the Hire Date is the current date.
7.
Click to select the CSV le with person informaon.
8.
Click Import to start imporng.
Note
•
If a person No. already exists in the client's database, delete
the exisng informaon before imporng.
•
You can import informaon of no more than 10,000 persons.
9.1.15 Import Person Pictures
Aer imporng face pictures for the added persons to the client,
the persons in the pictures can be idened by an added face
recognion terminal. You can either import person pictures one
by one, or import
mulple pictures at a me according to your
need.
Before You Start
Be sure to have imported person
informaon to the client
beforehand.
Steps
1.
Enter the Person module.
2.
Select an added
organizaon in the list, or click Add in the
upper-le corner to add an organizaon and then select it.
3.
Click Import to open the Import panel and check Face.
4.
Oponal: Enable Verify by Device to check whether face
recognion device managed in the client can recognize the face
in the photo.
5.
Click
to select a face picture le.
42

HIKVISION DS-K1T605 Series Specifications

General

Brand	HIKVISION
Model	DS-K1T605 Series
Category	IP Access Controllers
Language	English