HIKVISION DS-K1T605 Series User Manual

7.
In the Linkage Target area, set the property target to enable
this acon.
Buzzer on Controller
The audible warning of access control device will be
triggered.
Buzzer on Reader
The audible warning of card reader will be triggered.
Capture
The
real-me capture will be triggered.
Recording
The recording will be triggered.
Note
The device should support recording.
Alarm Output
The alarm output will be triggered for nocaon.
Alarm Input
Arm or disarm the alarm input.
Note
The device should support zone funcon.
Access Point
The door status of open, close, remain open, or remain
closed will be triggered.
Audio Play
The audio prompt will be triggered. And the select audio
index related audio content will be played according to the
congured play mode.
8.
Click Save.
9.
Oponal: Aer adding the device linkage, you can do one or
more of the following:
Delete
Linkage
Sengs
Select the congured linkage sengs in the
device list and click Delete to delete it.
Edit Linkage
Sengs
Select the congured linkage sengs in the
device list and you can edit its event source
parameters, including event source and
linkage target.
9.6 Door/Elevator Control
In Monitoring module, you can view the real-me status of the
doors or elevators managed by the added access control device.
You can also control the doors and elevators such as open/close
the door, or remain the door open/closed via the client remotely.
The
real-me access event are displayed in this module. You can
view the access details and person details.
Note
For the user with door/elevator control permission, the user can
enter the Monitoring module and control the door/elevator. Or
75

HIKVISION DS-K1T605 Series Specifications

General

Brand	HIKVISION
Model	DS-K1T605 Series
Category	IP Access Controllers
Language	English