HIKVISION DS-K1T605 Series User Manual

4.
Enter the basic informaon including person name, gender, tel,
email address, etc.
5.
Oponal: Set the eecve period of the person. Once expired,
the credenals and access control sengs of the person will be
invalid and the person will have no
authorizaon to access the
doors\oors.
Example
For example, if the person is a visitor, his/her eecve period
may be short and temporary.
6.
Conrm to add the person.
-
Click Add to add the person and close the Add Person
window.
-
Click Add and New to add the person and connue to add
other persons.
9.1.3 Issue a Card to One Person
When adding person, you can issue a card with a unique card
number to the person as a credenal. Aer issued, the person
can access the doors which he/she is authorized to access by
swiping the card on the card reader.
Steps
Note
Up to ve cards can be issued to one person.
1.
Enter Person module.
2.
Select an
organizaon in the organizaon list to add the person
and click Add.
Note
Enter the person's basic informaon rst. For details about
conguring person's basic informaon, refer to Congure Basic
Informaon.
3.
In the
Credenal Card panel, click +.
4.
Enter the card number.
-
Enter the card number manually.
-
Place the card on the card enrollment
staon or card reader
and click Read to get the card number. The card number will
display in the Card No.
eld automacally.
Note
You need to click Sengs to set the card issuing mode and
related parameters rst. For details, refer to Set Card Issuing
Parameters.
5.
Select the card type according to actual needs.
Normal Card
The card is used for opening doors for normal usage.
Duress Card
When the person is under duress, he/she can swipe the
duress card to open the door. The door will be unlocked and
the client will receive a duress event to
nofy the security
personnel.
Patrol Card
35

HIKVISION DS-K1T605 Series Specifications

General

Brand	HIKVISION
Model	DS-K1T605 Series
Category	IP Access Controllers
Language	English