HIKVISION DS-K1T605 Series User Manual

9.3 Set Access Group to Assign Access
Authorizaon to Persons
Aer adding the person and conguring the person's credenals,
you can create the access groups to dene which person(s) can
get access to which door(s) and then apply the access group to
the access control device to take eect.
Perform this task if you need to assign access group to persons.
Steps
•
For one person, you can add up to 4 access groups to one
access control point of one device.
•
You can add up to 128 access groups in total.
•
When the access group sengs are changed, you need to
apply the access groups to the devices again to take eect. The
access group changes include changes of template, access
group
sengs, person's access group sengs, and related
person details (including card number,
ngerprint, face picture,
linkage between card number and ngerprint, linkage between
card number and ngerprint, card password, card eecve
period, etc).
1.
Click Access Control Access Group to enter the Access Group
interface.
2.
Click Add to open the Add window.
3.
In the Name text
eld, create a name for the access group as
you want.
4.
Select a template for the access group.
Note
You should congure the template before access group
sengs. Refer to Congure Schedule and Template for details.
5.
In the le list of the Select Person eld, select person(s) and
the person(s) will be added to the selected list .
6.
In the
le list of the Select Door eld, select door(s) or door
staon(s) for the selected persons to access, and the selected
door(s) or door staon(s) will be added to the selected list.
7.
Click OK.
8.
Aer adding the access groups, you need to apply them to the
access control device to take eect.
1) Select the access group(s) to apply to the access control
device.
To select mulple access groups, you can hold the Ctrl or
Shi key and select access groups.
2) Click Apply All to start applying all the selected access
group(s) to the access control device or door staon.
Cauon
•
Be careful to click Apply All, since this operaon will clear
all the access groups of the selected devices and then
apply the new access group, which may brings risk to the
devices.
•
You can click Apply Changes to only apply the changed
part of the selected access group(s) to the device(s).
49

HIKVISION DS-K1T605 Series Specifications

General

Brand	HIKVISION
Model	DS-K1T605 Series
Category	IP Access Controllers
Language	English