HIKVISION DS-K1T605 Series User Manual

Figure 8-12 Time Parameters
8.8 Set Access Control Parameters
You can set the access control permissions, including the
funcons of authencaon mode, door magnec sensor, an-
passback, lock locked me, door open meout alarm, etc.
On the Home page, tap ACS (Access Control Sengs) to enter the
Access Control Sengs page. Edit the access control parameters
on this page and tap to save the sengs.
Figure 8-13 Access Control Parameters
The available parameters descripons are as follows:
Table 8-2 Access Control Parameters
Descripons
Parameter Descripon
Terminal
Authencaon
Mode
Select the face recognion
terminal's authencaon mode. You
can also customize the
authencaon mode.
Note
•
Only the device with the
ngerprint module supports the
ngerprint related funcon.
•
Biometric recognion products
are not 100% applicable to an-
spoong
environments. If you
require a higher security level,
29

HIKVISION DS-K1T605 Series Specifications

General

Brand	HIKVISION
Model	DS-K1T605 Series
Category	IP Access Controllers
Language	English