HIKVISION DS-K1T605 Series - Page 57

Note
There are two default templates: All-Day Authorized and All-
Day Denied, and they cannot be edited or deleted.
All-Day Authorized
The access authorizaon is valid in each day of the week and
it has no holiday.
All-Day Denied
The access
authorizaon is invalid in each day of the week
and it has no holiday.
2.
Click Add on the le panel to create a new template.
3.
Create a name for the template.
4.
Enter the
descripons or some nocaon of this template in
the Remark box.
5.
Edit the week schedule to apply it to the template.
1) Click Week Schedule tab on the lower panel.
2) Select a day of the week and draw me duraon(s) on the
meline bar.
Note
Up to 8 me duraon(s) can be set for each day in the week
schedule.
3) Oponal: Perform the following operaons to edit the me
duraons.
•
Move the cursor to the me duraon and drag the me
duraon
on the meline bar to the desired posion when
the cursor turns to
.
•
Click the
me duraon and directly edit the start/end me
in the appeared dialog.
•
Move the cursor to the start or the end of
me duraon and
drag to lengthen or shorten the me duraon when the
cursor turns to .
4) Repeat the two steps above to draw more me duraons on
the other days of the week.
6.
Add a holiday to apply it to the template.
Note
Up to 4 holidays can be added to one template.
1) Click Holiday tab.
2) Select a holiday in the le list and it will be added to the
selected list on the right panel.
3) Oponal: Click Add to add a new holiday.
Note
For details about adding a holiday, refer to Add Holiday.
4) Oponal: Select a selected holiday in the right list and click
to remove the selected one, or click Clear to clear all the
selected holiday(s) in the right list.
7.
Click Save to save the
sengs and nish adding the template.
48