HIKVISION DS-K1T605 Series - Page 16

No. Name Descripon
funcon, hold
the doorbell
buon for 3s to
power o.
Note
For details
about seng
the power
buon funcon,
see System
Sengs.
9 USB Interface
Plug in the USB
ash drive and
you can import
or export the
data.
10 Wiring Terminals
Connect to other
external devices.
11 Reset
While the device
is powering on,
hold the reset
buon and the
device will
restore to the
factory
sengs.
12 TAMPER
When the
tamper buon is
pressed down
and the tamper-
proof funcon is
enabled. If the
device is pulled
down, the alarm
will be triggered.
You should input
the device
acvaon
password to
dismiss the
alarm.
13
Network
Interface
Connect to
Ethernet.
7