Hioki ST5540 - Page 117

6.6 Printing Measurement Data (as required)
111
6
Chapter 6 Measurements
Measurement data (maximum values) can be printed out.
Printing
• The 9442 Printer (option) is required for printing measurement data.
• The key is displayed during printing.To abort printing, press .
• Set the interface to "Printer" before printing.
See "7.12 Interface Setting (For Communication and Printing)" (p. 133)
When setting measurement method to Manual
On the measurement screen, press to start printing.
Manual measurement screen
When setting measurement method to Auto
After automatic measurement ends, press on the mea-
surement result screen to start printing.
Screen displayed after automatic measurement ends
Printing Saved Data
1. Display saved measurement data.
(Regardless of where the Print key is pressed in a
data unit, all data in the unit is printed.)
See "Checking Saved Measurement Data" (p. 104)
2. Use and to select a data unit to print.
3. Press to print the data of the selected data unit.
To print data of two or more units, repeat steps
1
through
2.
4. After printing, press to return to the system
screen.
Saved measurement data reference screen