Hioki ST5540 - Timing Chart

9.5 Timing Chart
251
8
9
Chapter 9 External Control
This is a timing chart for output signals during manual measurements.
9.5 Timing Chart
Description Time
MIN MAX
T1 Pulse width of measured signal 55ms –
T2
Judgment result output time, display update
time
Other than
ACpeak:550ms
–
ACpeak:600ms –
• Free run measurements are made while in the leakage current measurement
screen.
• Calibration is performed once a minute. Measurements are temporarily halted
during calibration. (The MEAS signal goes HI)