7.12 Interface Setting (For Communication and Printing)
133
89
7
Chapter 7 Instrument System Settings
7.12 Interface Setting
(For Communication and Printing)
1. Press on the initial screen to display the system screen.
2. Press to display the interface setting screen.
3. Select an interface.
Sets the interface connection destination to
USB.
Sets the interface connection destination to
RS-232C.
Sets the interface connection destination to
Printer.
Interface setting screen
The interface is set to USB by default.
When "USB" is selected
The communication condition is fixed.
See For details of the method of using the interfaceÅF
"Chapter 8 Controlling the Instrument From a Computer
(RS-232C, USB interface)" (p. 139)
Press to return to the system screen.
To Next Page
Loading...
