6.6 Printing Measurement Data (as required)
110
Connect the 9442 Printer to the RS-232C connector of the HiTESTER.
Before connection, complete any necessary settings on both the printer(p. 108) and the ST5540 or
ST5541(p. 134).
Procedure
1. Turn off the power of the main instrument and printer.
2. Connect the 9444 Connection Cable between the ST5540 or ST5541 and the printer.
To avoid electric shock, turn off the power to all devices before plugging or
unplugging any cables or peripherals.
To Next Page
Loading...
