6.6 Printing Measurement Data (as required)
113
6
Chapter 6 Measurements
Mode Measurement
mode
EARTH Earth leakage current
ENCLOSURE1 Leakage current between enclosure and earth
ENCLOSURE2 Leakage current between enclosure and enclosure
ENCLOSURE3 Leakage current between enclosure and line
PAUXILIARY Patient auxiliary current
PATIENT1 Patient leakage current I
PATIENT2 Patient leakage current II
PATIENT3 Patient leakage current III
TOUCH1 Touch current (Enclosure - Earth)
TOUCH2 Touch current (Enclosure - Enclosure)
TOUCH3 Touch current (Enclosure - Line)
PATIENTP2E Patient leakage current (Patient - Earth)
PATIENTSIPSOP Patient leakage current (SIP/SOP)
PATIENTFTYPE Patient leakage current (F-type applied part)
PATIENTMP Patient leakage current (Metal accessible part)
TPATIENTP2E Total patient leakage current (Patient - Earth)
TPATIENTSIPSOP Total patient leakage current (SIP/SOP)
TPATIENTFTYPE Total patient leakage current (F-type applied part)
TPATIENTMP Total patient leakage current (Metal accessible part)
FREE Free current
Filter Filter
Network A
OFF Network with a frequency characteristic
ON Multi-frequency network
Network B1 or Network B2
ON Network with a frequency characteristic
OFF Network with 1 k
non-inductive resistance only
Network C
ON1_U1 Network compatible with perception/reaction (U1)
ON1_U2 Network compatible with perception/reaction (U2)
ON2_U1 Network compatible with abandonment (U1)
ON2_U3 Network compatible with abandonment (U3)
OFF Human body impedance network
Network D
OFF Network with 1.5 k
// 0.15 F
Network E
OFF Network with 1 k
Network F
OFF Network with 2 k
Network G
OFF Network with damp conditions
Current Target current ACDC Alternating current and direct current
DC Direct current
AC Alternating current
ACPeak AC peak
Upper Value Upper limit value 1.000 mA Upper allowable limit value*
Item Explanation Printed item Explanation
*When saved data is printed, this item is not printed.
To Next Page
Loading...
