6.1 Making manual measurements
81
6
Chapter 6 Measurements
The indication varies depending on the network, class setting, and measurement mode
selected.
See Appendix2 "List of instrument status, other test condition and special test condition"
(p. A4)
Changing measurement current
Target current
Conducts AC measurement.
Conducts DC measurement.
Conducts AC+DC measurement.
(When selection is enabled)
Conducts ACPeak measurement.
(When selection is enabled)
On the measurement screen, press to display
the auxiliary current setting screen.
The following changes can be made.
To Next Page
Loading...
