Replacing a Host I/O Board or Host I/O Module 10–1
Hitachi Unified Storage Hardware Service Guide
Replacing a Host I/O Board
or Host I/O Module
Hitachi Unified Storage systems support Host I/O Boards and
Host I/O Module that contain ports that support Fibre Channel
and iSCSI interfaces. This chapter describes how to replace Host
I/O Boards and Host I/O Modules in Hitachi Unified Storage
systems.
The following topics are covered in this chapter:
Precautions when replacing a Host I/O Board or Module
Replacing a Host I/O Board on CBXSS/CBXSL/CBSS/CBSL
Controller Boxes
Replacing a Host I/O Module on a CBL Controller Box
NOTE: This chapter assumes you have read the electrostatic
guidelines and other information in Chapter 3, Procedures before
and after replacing components. If you have not, review this
information and then return to this chapter.
To Next Page
Loading...