Replacing the SAS (ENC) cable 14–1
Hitachi Unified Storage Hardware Service Guide
Replacing the SAS (ENC)
cable
DBL and DBS Drive Boxes have a field-replaceable SAS (ENC)
cable. This chapter describes how to replace an I/O Module (ENC)
component on Hitachi Unified Storage systems.
The following topics are covered in this chapter:
Precautions when replacing the SAS (ENC) cable
Replacing the SAS (ENC) cable on a DBL/DBS Drive Box
NOTE: This chapter assumes you have read the information in
Chapter 3, Procedures before and after replacing components. If
you have not, review this information and then return to this
chapter.
To Next Page