Hardware description 2–41
Hitachi Unified Storage Hardware Service Guide
1 Gb iSCSI Host I/O Board
The 1 Gb iSCSI Host I/O Board for CBSS and CBSL Controller Boxes has two
1 G RJ45 iSCSI ports. The ports are designated in the following way when
the module is installed:
•
•
Fibre Channel Host I/O Board
The Fibre Channel Host I/O Board for CBSS and CBSL Controller Boxes has
four Fibre Channel ports. The ports support speeds up to 8 Gigabits, and
automatically fall back to 4 and 2 Gigabits. The ports are designated in the
following way when the module is installed:
EF
Legend LED Color Description
¶
ACT Yellow ON = data is being transferred.
?
LINK Green ON = link status is normal.
?
STATUS Green ON = Host I/O Board is in the power-on status.
Red ON = Host I/O Board is operating abnormally.
Visit the HDS Support Portal at portal.hds.com.
EFGH
Legend LED Color Description
¶
HALM Red ON = Host Connector is operating abnormally.
Visit the HDS Support Portal at portal.hds.com.
Blue ON = normal link status at 8 Gbps.
Green ON = normal link status at 2 or 4 Gbps.
?
STATUS Green ON = Host I/O Board is in the power-on status.
Red ON = Host I/O Board is operating abnormally.
Visit the HDS Support Portal at portal.hds.com.
To Next Page
Loading...