Hitachi IJ UX Service Manual

1
-
12
１ Remove the inlet cover. (Fastening screws x 4)
２ Mount the power cable in the inlet and mount the inlet cover.
Be sure to unplug the power cable from the electrical outlet before
performing work.
Precautions concerning electrical shock
Inlet cover
•Be sure to mount the inlet
cover.
•Wrap the attached cable seal
around the power cable and
set in the position shown in
the figure.
Caution
Cable seal
Power cable
Inlet base
Inlet cover
Side cover

Hitachi IJ UX Specifications

General

Brand	Hitachi
Model	IJ UX
Category	Printer
Language	English