Hitachi IJ UX Service Manual

2-27
2.10 Unit information
●Displays/changes unit TYPE-FORM, serial No., Icon type, login information and ink type.
Item
Contents
TYPE-FORM
Displays TYPE-FORM.
Serial No.
Displays Serial number.
Icon type
Select the Icon type on the display.
Viscosity coefficient
Ink viscosity coefficient can be changed.
Ink and makeup usage
time limit control
Whether or not to display a warning when ink and makeup
usage time limit is up can be set.
Board information
Displays board mounting state.
Model key, language key, Upgrade key, Option board.
●To control ink and makeup usage time limit, set “Ink and makeup usage time limit” to
“Enable” and input the lot number displayed on the bottle label. If used after the 1
st
day of
the month following “date of manufacture + specified usage limit,” a warning is displayed
every hour. Note that the warning is displayed even if the wrong lot number is input.
●
System USB required when change the Icon type.
Icon type
Displayed Icon
0
Old type Icon.
1
English subtitle.
2
Japanese subtitle.
3
Non subtitle.
4
Special type.
(Non color with start/stop button)

Hitachi IJ UX Specifications

General

Brand	Hitachi
Model	IJ UX
Category	Printer
Language	English