2-34
2.12 Language registration
●This function is to register screen languages.
●Register display language for the IJ printer from the “USB memory containing system data”.
●Keyboard type for character input can be selected by input mode.
Input mode
●
If “Japanese” or “Simple Chinese” is registered for “language 1,” it becomes the setting for
“local language.” When selecting “local language,” Chinese character supported by the
language registered as “language 1” can be input.
1 Insert the “USB memory containing system data”.
2 Press Select language at auxiliary functions.
The language selection screen is then displayed.
If Change language is not displayed, set to service personnel maintenance mode on the login
user selection screen.
3 Press Change language and select the desired language.
Selected language is then registered in place of already registered language.
4 Select language from registered languages.
Display language is then changed.
5 Select input mode.
6 Press OK.
To Next Page
Loading...
Need help?
General
