Hitachi IJ UX Service Manual

2-48
2.19 Careful Cleaning Setup
۰This is the function to clean the printer carefully before the weekend, such as 2-3 day shutdown
period. This careful cleaning uses more amount of makeup than the normal cleaning.
۰This function can be also used when requested by the customer to clean the nozzle after the
printer was left unattended for a long time. Please obtain the customer’s understanding before
executing this function.
۰Please refer to the Table below for the differences between Normal Cleaning and Careful
Cleaning.
2.19.1 Careful Cleaning - Setup Procedure
1 The maintenance menu is displayed.
If Prev. menu Next menu is not displayed on the maintenance menu, set the service
personnel maintenance mode on the login user selection screen.
2 Press Circulation environment setup Start/Continue on the second page of
the circulation control menu of maintenance.
Set “Careful-Cleaning Stop” to Disable. (Default setting: Enable)
3 Setup confirmation for “Confirmation window for Manual Control Menu”
Go to “Environment setup menu” screen and press Touch screen setup. Then, press
Display of “Confirmation window for Manual Control Menu”.
If Nondisplay is selected, the shutdown process of “Careful cleaning” is NOT available.
2.19.2 Instruction Manual for “Careful Cleaning”
When this function of “Careful-Cleaning Stop” is set to Enable, please hand out to the customer 2-
page instruction of “Hitachi IJP - Model UX Careful Cleaning Instruction Manual” which is attached
herewith and provide an explanation of “Operation and Precautions” properly.
No.
ITEM
Normal Cleaning
Careful Cleaning
1
Makeup to be used
Approx. 5ml
Approx. 10ml
2
Shutdown processing time
Approx. 4 minutes
Approx. 5 minutes
3
Decrease of viscosity index
Approx. ”3”
Approx. ”6”
For information on changing to the service personnel maintenance mode,
refer to “2.1 Setting of service personnel maintenance mode.”

Hitachi IJ UX Specifications

General

Brand	Hitachi
Model	IJ UX
Category	Printer
Language	English