Hitachi IJ UX - Page 67

2-47
(4) Fault
(a) Fault occurrence condition
When Expiration date management for ink and makeup is set to Enable, the fault of “Ink
Shelf Life Information” or “Makeup Shelf Life Information” is output under conditions
below.
№
Fault output condition
１
At startup, [Present
≧
Fault output starting date]
２
Every hour 1 minute after the hour, [Present
≧
Fault output starting
date]
３
Fulfill the fault occurrence condition of (2) Input lot number)
(b) [Guidance of ink shelf life] messages
Ink Shelf
Life
Information
Text
Replacement of ink is recommended.
Cause
1. It is estimated time to replace ink.
2. Ink lot number is different.
Solution
1. Use ink within its expiration date at replacement.
2. Confirm ink lo
t number on unit information screen.
3. Contact your local distributor.
Button
Close
(c) [Guidance of makeup shelf life] messages
Makeup
Shelf Life
Information
Text
Replacement of makeup is recommended.
Cause
1. It is estimated tim
e to replace makeup.
2. Makeup lot number is different.
Solution
1. Use makeup within its expiration date at replacement.
2. Confirm makeup lot number on unit information screen.
3. Contact your local distributor.
Button
Close