Hitachi IJ UX - Heating Unit Confirmation

2-17
2.3.6 Heating unit confirmation
● The operation confirmation of heating unit is performed.
① Heating unit power ON/OFF.
● A display of an ambient temperature and a heating unit temperature is performed.
● Perform this operation confirmation in a state other than "Ready" state.
1 Press Adjustment/operational checkout on the maintenance menu.
If Adjustment/operational checkout is not displayed on the maintenance menu, set the
service personnel maintenance mode on the login user selection screen.
The Adjustment/operational checkout screen is displayed.
For information on changing to the service personnel maintenance mode,
refer to “2.1 Setting of service personnel maintenance mode.”
Manual
Start
up
HOME
Back
Adjust./oper. checkout
Excitation
adjustment
Charge voltage
confirmation
Phase margin test
Heating unit
confirmation
Auto-phase gain
adjustment
Level sensor
confirmation
[Stop ]
2015.07.07 12:45
Com=0
Heating unit confirmation