Hitachi IJ UX - Thermistor Replacement

5-17
5.11 Thermistor replacement
１ Remove the four (4) fixing screws, and then pull out the coupling to the direction of the arrow.
２ Remove the banding band and the packing.
[Caution]
Before removing the banding band and the packing, put a mark on the tube by a tape, etc. as the guide
for reassembling the new ones.
Coupling
Banding band
Packing
Tube (transparent)
Coupling
Thermistor
Fixixng screws (2 pieces)
Fixixng screws
(2 pieces)
Banding bands (2 locations)
Packing
[UX-D, B]
[UX-E]
Tube (transparent)
Put a mark here
Put a mark here