This is the function to clean the nozzle carefully when shutting down IJP.
Please read the instructions below and execute “Careful cleaning” function.
1.1 Operation procedures of “Careful cleaning” shutdown process
(1) Press Shutdown button at top right of the screen and [Shutdown Process Confirmation]
message will appear, as shown in bottom half of the figure below. *1
(2) Press Careful cleaning button.
The regular shutdown process with nozzle cleaning is executed by pressing OK
button or STOP*2 button.
*1 If [Shutdown Process Confirmation] message does not appear, go to Item 1.2 below.
*2 STOP button will only show up with Model UX-D,E.
1.2 Confirmation of setup items for Confirmation message display of Control menu
In case that even the Shutdown button at top right is pressed but [Shutdown Process
Confirmation] message does not appear, go to “Environment setup menu” screen and press
Touch screen setup. Then, press Display of “Confirmation window for Manual Control Menu”.
If Nondisplay is selected, the shutdown process of “Careful cleaning” is NOT available.
(
(
２
２
)
)
(
(
１
１
)
)
To Next Page
Loading...
