Hitachi IJ UX - Page 20

1
-
14
11
Adjustment of APH gain
(Touch screen operation, automatic acquisition)
Service Manual
2.3.4 Auto phase gain adjustment
12
Setting of excitation voltage
(Confirm the real printing state and the ink drop
mode and then, set the excitation voltage)
Technical Manual
6.10 Excitation V adjustment
13
Readjustment of APH gain
(Touch screen operation, automatic acquisition)
Service Manual
2.3.4 Auto phase gain adjustment
14
Editing Print Data, etc.
(Print start delay, character height, etc.)
Instruction Manual
4. Creation and printing of messages
15
Back up(backup in service staff maintenance
mode)
Service Manual
2.9 Back up
[Caution]
1) The Caps which took off in step 1 is used at “Long –term Shutdown”, so please keep
them.