Hitachi IJ UX - Page 23

2-3
3 Select any user.
The keyboard for inputting the password is displayed.
4 Input password “HIESmmdd” and press Enter. (mm: Month, dd: Day)
Example: If date is December 31, 2015, input “HIES1231.”
When password is accepted, the equipment enters service personnel maintenance mode
and the printing description screen is displayed.
[Caution] The password “HIES
mmdd” is a special password for enabling
functions not disclosed to the customer. Do not disclose the password
to the customer.
[Caution] After completion of service maintenance work, be sure to return to
the user maintenance mode. The service personnel maintenance
mode is canceled by setting of “Service maintenance” to “protect” on
Password protection menu. When the power is turned off, the service
personnel maintenance mode is automatically canceled.
When in service personnel maintenance mode, the Touch screen is
turned off if there is no panel input within 15 minutes regardless of
the Display setting on Touch screen setup screen. The equipment
returns to user maintenance mode at this time.
When in service personnel maintenance mode, this line of the screen turns [yellow].
Shift
Enter
Makeup
Ink
Message name[ ]
[Stop ] Print description
Manual
Start
up
<< >>
Menu
Create/Edit
message
Ink operating time 0 (hours)
Cumulative op. time 0 (hours)
Ink pressure 0.000 (MPa; standard value: 0.250)
Print count 0 (prints)
- +
2015.07.07 12:45
Com=0
Current user ID : admin
Environment
setup menu
Select
login user
Auxiliary
function
Maintenance
Single
scan