Hitachi IJ UX Service Manual

2-55
(4) Circulation system control data (SEQUENCE.TXT)
[Example]
- Code
Refer to the code of above example.
- Sequence name
Refer to the sequence name of above example.
- Result
0: Normal end, 1: Aborted, 2: Abnormal end
- Aborted step No.
Internal management code
- Info1-Info4
Internal management code
*) In case of change the ambient temperature upper limit on the system environment
screen, the before / after temperature value are indicated as below.
Before change: Info1
After change: Info2
(5) Trace data(TRACE.TXT）
[Example]
№
Cod
e
Sequence name
Date
Time
Information
1
001
Power turned on
time
2014/01/22
9:20:00
2
009
CM clock
2014/01/22
9:20:00
[CCPU], 2014/01/22, 9:20:10,
[MCPU], 2014/01/22, 9:20:10
3
003
Select message
2014/01/22
9:25:35
0001, normal
- Code : refer to the next page.
- Sequence name: refer to the next page
- Info1-Info4 : refer to the each Logging contents
№ Date Start time
Finish time
Code Sequence name Result
Aborted
step №
info1 info2 info3 info4
1 2011/7/7
7:05:29
0:02:09 160 Eject ink B 3 0 0 0 0 0
2 2011/7/7
7:06:56
1:53:16 208 Noclean-stop 0 0 0 0 0 0
3 2011/7/7
8:06:56
0:05:35 80 Nozzle backwash 3 0 0 0 0 0
4 2011/7/7
9:07:45
0:22:42 32 Ink drainage 3 0 0 0 0 0
5 2011/7/7
10:12:04
0:08:47 176 Eject ink A 0 0 0 0 0 0
6 2011/7/7
11:37:20
0:16:57 192 Clean-stop 0 0 0 0 0 0
7 2011/7/7
12:07:22
0:03:51 96 Gutter cleaning 1 2 0 0 0 0
8 2011/7/7
12:14:45
1:00:00 246 Ambient temp. upper lim. 0 0 40 30 0 0

Hitachi IJ UX Specifications

General

Brand	Hitachi
Model	IJ UX
Category	Printer
Language	English